Hiboy BK1

1. Use a screw to pass through the front fork, spacer, wheel and spacer, front fork, and screw nut in turn, then tighten the screw nut.
2. Use the rubber hammer to knock the tube plug into the front fork.
3. Adjust the handle to a suitable position and angle, and then tighten the stem and the handle with four screws.

In addition, the seat height can be adjusted according to your kid’s height. Simply open the quick-release buckle of the cushion, adjust the height of the cushion until it suits the rider’s height, and then put back the quick-release buckle.

1. Open the rubber plug
2. Insert the charging plug-in
3. Charge and plug in the rubber plug after charging

• Cleaning and Storage
  1. Wipe the stains on the E-bike’s body with a damp cloth.
  2. Do not clean the E-bike with alcohol, gasoline, kerosene or other corrosive chemical solvents.
  3. A high-pressure water spray is not allowed to wash the board.
  4. Keep the E-bike indoors where it is dry and cool.
• Battery Maintenance
  1. Use original battery packs according to the models or brands.
  2. Do not touch the contacts, dismantle or puncture the casing.
  3. To avoid potential damage or fire, use the original power adapter.
  4. Charge the battery fully to extend battery life.
• Storage and Disposal
  1. Keep and store the bike in a cool and dry place.
  2. In daily use, avoid recharging the scooter after completely exhausting the battery.
  3. Charge the battery when the battery is low.
  4. Please charge the E-bike every other month to preserve the battery.